GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Element at the back is very hot and water on the floor?

Zanussi Frost Free Fridge Freezer.
The metal tubing at the back is very hot and the freezer is leaking water from the bottom and there is ice forming in the bottom of the freezer compartment although the food is still frozen. Is there a blockage somewhere?
Jane Silbert, July 2008
metal tubing at back is meant to get hot

ck, July 2008
look at the back of the appliance above the compressor and you should see a grey spout.these get blocked up and cause the defrost water to run into the base of the freezer and freeze.sometimes pinching the spout opens it and bits fall out.if not remove the drip tray from the compressor (wiggle and pull hard) and then remove the spout and poke something up hole.do this when the freezer is defrosting or switched off at mains for several hours as water will come out if the blockage has been cleared and you will then know you have cleared fault.

ck, July 2008
link Click here to see other fixes for Zanussi.