i have a veritas 8c alarm and i cant set it, program or anything. zone 6 lights when i enter my code and full set and beeps 6 times. i only can program the chime function. any suggestions. i dont have the manual and dont know the manufacures reset code if i open up the panel to shut off anti tamper.

paul, July 2008

got a manual, if i remove the front cover i think the anti tamper will go off. any idea what the cod eis to stop it? thanks. i think zone 6 is the panic button, but ive looked at that and it seems fine. other zones are ok.

paul, July 2008

The zone 6 light and 6 beeps on setting indicates that zone 6 is active - is it a door open ? or is it a movement detector that doesn't light up when you walk in front of it ? If you have difficulty finding zone 6 - find the others then find zone 6 by a process of elimination.

Enter code xxxx
Press Prog
enter 0 6
This is walk test - as you walk around the corresponding lights on the panel will go on and off. The panel will still bleep 6 times though as it always bleeps the highest zone active.

Alarm Engineer Bristol, July 2008

the manual is on ukpanels.com

Roy, July 2008