Im changing my head gasket and need to find TDC as stated in the haynes manual for the car. It says "Look through the aperture at the flywheel end of the engine and continue turning crankshaft until the TDC timing mark on the flywheel/driveplate is aligned with the TDC mark on the gearbox bellhousing." I cant see the timing mark on the flywheel/driveplate. Anyone know what this looks like or where it should be?

Many thanks,
Sean

Sean Russell, July 2008

go ahead and take thehead off.when it open u can see the pistons.turn crank till 1 and 4 are at top.look for marks on flywheel then.paint a small blob of white paint/typex for future reference on marks.

caINE, July 2008