Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    Click here to ask your question

How can i fix my Stihl 023 chainsaw?

Basically, my oil leaks from the chainsaw, but the bar will not oil, making the sprocket extremely hot and damagaing the bar and chain. Someone told me it could be the oil pump, but i dont have the knowledge or the pump to fit!
Ben Stallard, July 2008
How do i replace oil pipe on stihl chainsaw, no oil reaching engine, any help appreciated

Phil, October 2010
Have you checked that casing isnt damaged, especially around sprocket area, i had this problem and plugged the hole, seems to be ok at mo.

al, August 2008
Caine is correct.

Major, major job to replace oil pump on this model. Not for the faint hearted.

pleasant, August 2008
take the air filter off and unscrew the spark plug, then u clean that out and put some oil in it, then put it back together and it will work, i had the same problem my chainsaw runs really good now.

Freddy, July 2008
if the oil is leaking from the bottom / check the oil feed pipe has not come off.

davescatt, July 2008
I have the same problem, it's either. oil pump has packed in new pump about £23 then you put it in. or oil pipe /or pump blocked with wood dust.

davescatt, July 2008
automatic chain oiler fitted to this mdl is not adjustable.special tool and knohow required for removal//dissasembly.dealer time.sorry.

caine, July 2008