how can I replace the new motor into the cleaner, without damaging the unit?
hans burghardt, February 2010
Hi,
Just go to www.dyson-online.com and look at their technical advice section. The site is fantastic! Good luck.
Charles, January 2006
It is possible to get the motor out, but you will need a special Torx screw driver, and some determination. When you get the motor housing out, you will need to prise the grey spokelike side plate and the push down on the spindel on the opposite side (remove belt first).
Eddie, December 2005
Get Dyson to do it £55 all in charge with 1yr guarantee, call within 3 days, fixed on 1st visit.
