I removed the motion sensors from the wall without disturbing the wiring so that I could paint behind. When I put them back the key pad beeps everytime the sensor picks up any motion. How do I clear this?
Thanks a lot
Roger Gibson

Roger Gibson, July 2008

The 'chime' for the PIR zone has been turned on.
Stand at the keypad and have someone move infront of the offending PIR. The relevant 'zone' will be illuminated on the keypad when movement is detected. Just press and hold-in for two seconds on that zone. That should clear the 'chime'

Guy, January 2009

If you hold the button down on the keypad which corresponds to that zone it will activate chime zone in that zone. To turn it off (which is what you want to do) do the same.. hold down that button for 3 seconds..

Kent Smith, August 2008