Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

key code light fiat punto x reg 1.2 ?

no red key key code light stays on car wont start got one blue key when bought car had to to change engine disconnected battery think this is the cause of the problem
steve, July 2008
ive fitted a few second hand engines i 2000 on puntos and the only time ive had this problem is when i have failed to replace the small earth wire back on the injector body. the crankshaft sensor is not coded to the ecu good luck

merrick, August 2009
this could be due to a bad earth connection, or a problem with your imobilizer which is on the starter motor, disconnect these two wires and join them together which is called bypassing, you shouldnt hav another problem with the imobilizer as this permanently disactivates the imobilizer. it happend on my t reg punto sporting

mark, April 2009
nope its the crank shaft angle sensor the one on your origonal engine is coded to the ecu also so you will need to find it and put it on your new engine

gavano, August 2008
link Click here to see other fixes for Fiat Punto.