Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    wendy asked ... Old Creda Solar Plus Cooker will not come on?    |    Click here to ask your question

potterton proforma 28 gas boiler has high bar pressure !?

i noticed 2day that the pressure on my boiler was very low so turned it up t0 1 and half bar, to my horror it kept going up until it was 3 and a half bar,even tho i made sure valve to turn pressure was off, there is water dripping outside badly down the wall and the pressure dsnt seem to be dropping, the water heats fine and everything seems to be working great, i have tried releasing safety valve as i have dun in the past and bleeding radiators but nothing is working and outside is flooded.the boiler has been making sum loud clanging noises then stopped but pressure went back up again. I am at my wits end as i,m single mum on low income and would appreciate any advice
thankx pam
pamela f, July 2008
you could check that the handle on the filling loop has not rounded off so it might look switched off but valve may still be wide open. are both valves closed? generally two

iain, July 2008
link Click here to see other fixes for Potterton.