Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

hotpoint aquarius 1000 washing machine?

When the machine is on spin it does'nt spin. Would the belt have slipped off if yes could you tell me where it is how to get to it thanx.
sarah, July 2008
the water wouldn't drain after cycle

don, March 2011
no power to machine (door lock light not on)
fuse changed in plug
different socket used
still nothing happens
any ideas ?

s.chambers 05@tiscali.co.uk, July 2008
hi we have just had the same problem. TURN OFF POWER AND UNPLUG!!!!!!! open your machine by undoing the two screws at the back at the top in both corners . then slide the lid to the back ,and lift the lid off you will then see the inside of your machine the motor is on the right hand side at the back it has the belt attached to it if the belt is still attached try to move the white coloured arm on top of the motor it has a catch that you can push with your finger push the arm up and down a few times
if that does not work im afraid you will have to get some one in or get a new washer

Andy Taylor, July 2008
link Click here to see other fixes for Hotpoint Aquarius.