hey smurf these are so easy u can do them with ure eyes closed lol wouldnt advise it anyway remove front or rear wheel there are 2 13mm bolts that hold the caliper on undo them and u should see 2 pins holdin in the pads withdraw them and the pads should now be free with a pair of large grips push bk the piston inside the caliper this is so the new pads will fit place pads inside the caliper and push the pins bk in making sure they have gone through both holes on each pad at top slide this then bk over the brake disc and line up with the bolt holes and re fit nuts makin sure there tight and thats it repeat this process on bk wheel
being aware the back wheel does not come fully off because of the exhaust but u can just slideit back leaving u enough room to work without the hassle of takin of the exhaust hope this helps ya mate good luck
sean, August 2008
