My AEG Lavamat 66600 will not rinse in the normal wash/rinse cycle. It pumps continually after the last wash then shows Error Code E20. I have drained all water away through the little rubber pipe and checked the filter. Eventually with a lot of coaxing I can get it to re-start on a new rinse cyle. Occasionally Error Code E60 comes up......not listed in the manual. I suspect the sensor thinks that there is still water in there, can I disable the sensor? Alternatively there may be a blockage before the filter is there a service insruction showing how to disassemble and re-assemble? The strange thing is that the wash cycle includes a drain and re-fill which works fine.

Rob, August 2008

My washer won't spin noticed the door light is green and not red

Frances, February 2015

E20 keeps showing, have cleaned filter...help

Liz, September 2011

hold the drain hose into a bucket and see if the water comes out with force.if it doesn't then you need to check for blockages within the water system pipework.e20 is a drain issue (not draining within the permitted time) or faulty pump (impellor loose on shaft).you need to check these points to work out whats happening

ck, August 2008