Ben asked ... Toyota Yaris French or Japanese?    |    Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Felix asked ... Hitachi vt-m70em?    |    Katie Bond asked ... Fixing auto threader on Baby Lock Enlighten Overlocker?    |    Chris. asked ... Miele W800 novotronic washing machine?    |    Click here to ask your question

fix my hotpointCTD40 tumble drier?

Machine heats up and is running, but no water collecting in water reservoir. Filters clean and no pipes disconnected. Any help much appreciated.
Mogs, August 2008
It could be what the other Answerer has said and it might be rectified easily, Try this,

What has probably happened is that the small hole at the back of the condenser drawer (like at the back of older fridges) has become blocked.

Unplug your machine.

Take out the condenser drawer (the bit that you should rinse through every month) (check it is properly clean while you are there).

You'll need to get down on the floor for the next bit!

Put your hand right to the back inside the place the condenser drawer fits and feel for a gully..... it's probably full of wet sludge, hair and fluff!

Remove as much as you can with your fingers to the left but especially to the right.

After that, it should be clear enough for you to feel for the small hole down on the back right.

Get a thin plastic straw or plastic wire tie (don't loose it!) and poke it in and give it a wiggle.
This will allow the water to drain properly.

Let me know how you get on cinders2001@googlemail.com

J Ludbrook, January 2009
little pump that raises water to reservoir will be blocked with lint etc.

Phil SE9, October 2008