how do i get the drum off???
there is no hole to poke through and release the shoes.
t reg 1.6 glx
thanks

neil danby, August 2008

The drum is held on by a large nut, because the drum also contains the bearing. The nut is tabbed, so use a screwdriver to push the tab back, take the nut off, then use a puller if needed to get the drum off. You might be lucky and be able to get the drum off just by putting the wheel back on with a couple of road wheel nuts and using the wheel to pull the drum off. If you have done this and the drum is still tight, make sure the handbrake cable is released and pray the shoe isn't 'welded' to the drum. Worst case scenario is grinding the drum off.

206 geekfreek, January 2010

my hand brack on my peugeot 206 keeps going from 4 to 5 clicks to 10 i just dont no wat is wrong

darren lowrey, July 2009

hi there isnt a hole in the 206 drums there should a lip on the bottom of the back plate lever a scewdriver in it and hit the top outward while keeping the preasure on the bottom

n3o1916, December 2008