hi deos anyone know how to bleed the cooling system properly on a 2001 mk3 mondeo tddi. as i have changed the thermastat and check the water pump is ok. thanks

ashy, August 2008

hi i have done this but the car is still overheating any other possible causes. thanks

ashy, August 2008

Hi, others may have a different method, but I find this works, remove the cap from the expansion tank, select full heat on the heater, start the engine and let it run at a high idle for 15~20 mins, then stop the engine, put the cap back on the expansion tank, run the engine for 10~15 mins, switch off and let it cool down then carefully remove the cap on the tank and top up as required

nigel, August 2008