When my BEKO 520S is on a spin it's making a very loud noise and vibrating. The top brick is tightly fixed to the drum and the two side springs seem in place.

I have completed a spin wish no clothes and the machine did not make a noise or vibrate.

Please can someone help as the machine feels and sound like it is about to take off?

Andrew, August 2008

element holder comes out and allows heater to hit bottom of drum on fast spin.you will need to remove the element to see if the mounting clamp is in the correct possition or missing

ck, August 2008

check the bottom concrete weight is tight as they come loose.2x 13mm bolts to tighten up.tip machine on its back to gain access.

ck, August 2008