andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

home Fix label Vehicles label_important Lorries/Trucks category Scania

scania clutch?

scania clutch on setting off from standing start vehicle judders as if the clutch is engaged or disengaged with no inbetween point. Could this be master or slave cylinder thanks for any ideas
merrick, September 2008
home Fix label Vehicles label_important Lorries/Trucks category Scaniadone
Req new centre plate as springs are worn out on plate.

Haydn, November 2012
the springs on the pressure plate are broke

Jay, October 2008
clutch is nearly worn out

no idea Nick, September 2008
could be or maybe the flywheel is badly worn and is making the judder!

madmax, September 2008
link Click here to see other fixes for Scania.

Fix Fault - Vehicles

home label Vehicles label_important Lorries/Trucks

07 plate iveco daily?

Vehicles > Lorries/Trucks > Iveco

How to start iveco eurocargo tector. Been not moving for 2 y?

Vehicles > Lorries/Trucks > Iveco

Daf LF 45 roof beacons?

Vehicles > Lorries/Trucks > DAF

warning light?

Vehicles > Lorries/Trucks

daf45?

Vehicles > Lorries/Trucks > DAF

my DAf 45 is completely dead. ?

Vehicles > Lorries/Trucks > DAF

Daf cf?

Vehicles > Lorries/Trucks > DAF

Gear selection issue after tipping cab forward, iveco 75e15?

Vehicles > Lorries/Trucks > Iveco

Fix Fault - Vehicles

home label Vehicles label_important Lorries/Trucks

fixfault.com

fixfault.com for free repair help, information and advice.

How can I fix my Nissan Cabstar?
How can I fix my Ford Cargo 811?
How can I fix my Iveco 75E15?
How can I fix my Iveco Daily?
How can I fix my DAF CF 450?