does anyone know how to light a glowworm fuelsaver 25-30 boiler?

dave, September 2008

Thanks mate
It worked a treat

Dave, September 2008

Pull off the bottom flap.You will see a gasvalve in front of you probably with an arrow pointing at on.Grab the knob and twist it till pilot is in line with the arrow,then press it in and you should have a spark ignitor to the side,press this in 4 or 5 times and view thro window.If it lights keep the button held in for at least 30 secs.Let go slowly.If it stays lit then move the valve so that on is back in line with the arrow then switch the boiler on and you should be on.If the pilot goes out when you release the valve after 30 secs the t/couple could be duff.

Tony S, September 2008

slide off bottom panel instructions there bsicly press in gas valve knob and ignite with ignition botton once alight hold knob down for 30 secs however if pilot has gone out and gas has not been turned off at all then most lightly you have a problem with pilot

tony, September 2008