3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

Door hinge adjustment?

My kitchen door fitted to unit is jamming & out of line.
Although there are adjustment screws on spring hinges etc . I find it difficult to carry out meaningful adjustments.
Maurice D, September 2008
Take your fingers out!

Johnny, February 2009
lol

It's easy when you know how though Maurice, are the hinges on the cams?

terryT, December 2008
You can use the screws which attach the hinge to the carcass for coarse up & down adjustment - i.e. slacken them on the top and bottom hinges and move the door up or down before retightening screws.
The adjusting screws on the hinges will correct squareness of the door to the carcass. e.g. Right Hand door:Turn the screw on the top hinge clockwise and the top left corner of the door will drop.
Turn both screws on top and bottom hinge together by the same amount and the whole door will move left or right.

JD, October 2008