GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

my whirlpool fridge/freezer display?

my whirlpool fridge/freezer display keeps flashing and clicking,how can i stop this
cross, September 2008
My display panel only shows the word sense and F99%, it won't show me temperatures or anything else and the buttons don't do anything! What do I do? I turned it off for a few hours and now it's back on but hasn't changed!

Corrina, June 2016
Whirlpool sent out one of their agents who service the london area www.agsrefrigeration.co.uk tel 07723019161 they repaired mine hope i don't have any more problems with the damm thing.

Tom, May 2014
Hi, contact me on 07799611296 i sell repair kits for the pcb at the rear

David Hallas, March 2014
My whirlpool side by side, kept flashing and clicking, but has now stopped - the fan has stopped and the motor isn't running? Has it died or can we revive!! Please help

Trisha, May 2012
Hi,

I have similar problems with side by side fridge/freezer. It has just started showing on freezer temp panel -- & warning light flasing & blleping.
Any help/advice?
Would be much appreciated!

Craig.

craig, May 2012
We can help with this problem.
We can repair you PCB module.
Please go to fridgeshop.net or phone Phil on 01637 854295

peejaysea, April 2010
Have had the above faults and the an engineer came and replace the board at the back, cost a small fortune.
Now the water has stopped and the water is not getting to the ice box, have a flashing "F" anyone had the same problem?
Thanks Paul

PAUL WOGEL, February 2010
My fridge had the problem with the display flashing on the front which is apparently common as well. I took out the front PCB and found it was a crap design on the mains-derived 5V regulator which was failing to provide enough current for the electronics. I modified it and it's been fine. Now a year later it's started clicking at the back so I think it's a similar problem on the rear PCB. I'm afraid it's just a cheap and nasty electronic design on the control boards designed to keep the component count down. For another few pence they could have made it reliable but everything's made down to a price. Don't buy another, I won't...

doctorbellend, June 2009
mine freezer does the same. having read other posts it seems a common fault with the front pcb whirlpool use. mine is only 2 yrs old. im not an engineer but it was easy to take the door off and remove the facia and take out the pcb to inspect. i then found qer_ltd on ebay who undertake to repair the board with a 12 month guarantee for just a tad below £50. now thats better than £120 part + £80 enginers time to fix. i was going to scrap the freezer and buy a different make. i havent recieved the repair back yet but have every confiodence it will work - hope this helps

Nick, January 2009
Cheers Mark

Martin, October 2008
It is a common problem on the Whirlpool American Fridge Freezer. I have been told to buy 2 new PCBs at £200 each or remve them and replace the resistors, these are available from Maplins approx £15 the lot.

Mark Eastwood, October 2008
Hi,

Did you get this resolved? I have the same problem.

Cheers,
Martin

Martin Clarkson, October 2008
my whirlpool fridge freezer keeps clicking how can i stop or repair it

john simms, October 2008
link Click here to see other fixes for Whirlpool.