how to fit a new drum belt to a white knight reverse tumble model 38aw

robert lodge, October 2008

remove the lid and back panel screws.this will give you limited access to get belt over the drum.once belt fitted over drum lay tumble on side and remove plate on bottom panel (4 screws).this will give you access to belt and motor pulley.pull belt over motor pulley(very hard) as it is elasticated.manually turn drum if ok refit screws

ck, October 2008

turn power off,put machine on to its front and unscrew all screws about 35 in total then you should be able to lift drum out and you should be able to put your belt on,now this is the part am stuck on how to put belt over motor that drives the belt if you find out let me know i hope that helps!!!

alan, October 2008