I want to add a switch on the dashboard of my 94 Xantia, but there appears to be nowhere convenient to run a wire from the battery through the baulkhead and inside. I really do not want to remove the dash panel! Realistic suggestions please!

Ross, October 2008

All your wiring,and many other things run through the bulkhead,in the engine compartment locate the wiring harness where it goes through bulkhead,peel back the rubber grommet push a stiff wire through(copper earth lead)with an eyelet formed on the end,and have someone locate it on the inside and pull it through with your wire tied/taped to the end(your end) it's fiddly but it is the way it's done.

Rich, October 2008