My Honda xr125 has a starting problem .It has no spark even with a new cdi ,coil,spark plug ,and a fully charged battery showing 12volts .The starter turns and it has compression when i place my thumb over the plug hole and try to start it. Please help, thanks.

mjc, October 2008

I have the same problem can someone help me find the anser to the problem

Jacob shone, January 2015

Have the same problem buddy. hop someone has the answer tanks pal

motomadness, May 2011

http://www.hoc.org.uk/help/

honda have a recall on this for some models. check if yours falls into the category

jus, June 2009

I agree, but is the kill switch off or on!

simple things first, check your connections.

the first thing I ask is what have you done, ie: what did you do before it stopped working!

backtrack and double check continually!

jkwobble brisbane, October 2008

check resistance of flywheel pick up,a two wire item should within 80 to 400 ohms.

glen, October 2008

You've got to have a problem with an interlock switch or the kill switch.Start there,find the kill switch wires (usually end in head light bowl)and unplug the multi plug,find the switch connections and short a split pin across the terminals to complete the circuit.bypassing the switch.and spin it over.Or if there is a switch on the side stand or neutral switch,do the same.somewhere you are looseing circuit/voltage,and faulty switch connections sound likely.The other alternative is a fault in the stator pulsar coils.

caine, October 2008