The bottom drawer of my F&P 2 drawer dishwasher DD603 is incessantly beeping and showing an error mode, and from past experience I believe the ECM has been cockroach affected. I would like to replace this myself. I am able to take off the front and top panels of the drawer, and get to the ECM, but cannot work out how to remove the ECM from its housing. Have removed the 2 small clear plastic pegs from the top right of the ECM, but don't want to force it out in case I break anything important. Any info would be greatly appreciated. Thanks.

Lifby, November 2008

You don't have to take off the top panel, just the front of drawer. Remove the two lower wiring harness plugs. Then on the right hand side near the top you will see a release clip. Press it to the left & swing the lower part of the ecm out away from the drawer. Then lift it up & off the two top locating pegs & remove the two left hand wiring plugs. Refit in reverse order.

Lincoln Appliance NZ, November 2008