narnia asked ... Matsui ct-111ss?    |    Jason asked ... How to fix handset problems ( intercom ) and access control?    |    andy asked ... Samsung VP-D60 camcorder?    |    Shopper asked ... Poor Renault Radio Reception?    |    reg bardle asked ... Lg 7kg dd?    |    Click here to ask your question

biasi 24 fault finding dhw?

hi there have a biasi 24s i seem to be having a problem with the dhw when i turn the hot tap on the water some times runs hot and then cold and vice versa the boiler fires up as soon as the tap is turned on and the ch is ok can anyone help
stewart, November 2008
hi I have a biasi m96m/c2 model ,

I turn hot water tap on and boiler dos not fire up c/h do s not work either .
this fault used to happen for short time in morning hot water then cold I turn hot tap off then wait a few minutes then turn hot water on its was ok . BUT NOW will not fire up at all

victor, July 2016
i turn on hot tap heats up for30 secs then boiler maks loaud bang goes out wait 30secs same happens again

robbey, March 2012
there is a problem with central heating,wont start but the hot water option working fine

adam chyzynski, October 2011
hot water is working but not central heating

ejaz, October 2010
Hi im a corgi engineer PURE GAS of poole.

The water to water heat exchanger is scaled up if you sometimes find the water is cold and then hot sometimes scalding. replace this add put a water softner on the mains into the boiler cheers

Simon Engineer

Simon, January 2009
checkout www.theanswerbank.co.uk

john, November 2008