andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

How do I mend my extrater fan 2210?

My cooker extracter fan cuts out when it gets hot ,will commence working when it cools down in the kitchen , not a lot of good that , any ideas on what will put it right ?
cooker nerd, November 2008
Hi, alot of these hoods are rated to specific hobs underneath.I would guess that you have free standing cooker underneath.The output of the cooker is above the limit of the hood.Some manufacturers have high temperature motors that can be fitted.If you have a normal hob under it,I would check that the vent is totally clear.If the vent is blocked then the hot air cannot get out.The motor then cuts out on its internal toc (stat). All the best.

FOXY, November 2008
link Click here to see other fixes for Extrater 2210.