Carol asked ... How to remove roller from lawnmower?    |    Ariana Orellana asked ... Code?    |    Lynnie asked ... BT Studio 4500 cordless telephone?    |    David Dawes asked ... How to recoil the starter spring - Champion R484TR?    |    peter high asked ... How can I set time on my Neff oven?    |    Click here to ask your question

HOW TO RESET IMOBILISER FOR ROVER 214i?

charged car battery on rover 214i and couldnt get it to start and codes dont work,how do i reset it
effy, November 2008
Disconnect car battery then remove the key fob battery and press the fob buttons with the battery removed. this will remove any residual charge in the fob. Refit fob battery and reconnect car battery and then press 4x left fob button and then 4x right fob button then 4x left fob button.It should start working during the presses. If this doesn't work put ignition on and press fob buttons with ignition on. If still not working inspect the solder where the battery support solders to the circuit board in the key fob, done loads of these where they are cracked. Just resolder and follow the above procedure. Good luck. Geoff

Geoff, November 2008
Contact Tech-Tronics in Manchester (0161 872 6275) they'll be able to replace or reprogram your fob for you so you can use your car again.

Steve, November 2008
link Click here to see other fixes for Rover.