home Fix label Garden Tools label_important Chainsaws

How do I remove a chainsaw clutch?

when trying to remove the clutch nut, the whole flywheel is turning. How do I stop the flywheel from turning or lock it so that I can get this nut loose. Any ideas would be very helpfull, thank you. Keith

Keith, August 2004

home Fix label Garden Tools label_important Chainsawsdone

Remove the spark plug and install a bolt 3-4" long into spark plug hole until bottom out on top of piston. Use a hammer and drive to loosen the clutch.

Stevieray, February 2008

go with the top answer we use the same trick in the forestry but with our boot laces

ruffryda, March 2005

I removed the spark plug, moved the piston to the down position, insert some 3/8" rope into the cylinder to keep the piston from going back up all the way (leave enough rope out to be able to remove it when finished), this will lock the piston enough so you can remove the clutch.

Bill, August 2004

i think you have to use an inpact wrench try your local tool hire shop they may be able to help.i have a small husqvarna i got the same problem thats what i am going to try. best o luck alz.

alz, August 2004