GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

fisher paykel gwl11 need to get to the drain pump to replace?

does anyone have the steps to remove and replace the drain pump?
Gary R., November 2008
Once you tilt the machine back, it's pretty self explanatory. Unplug the wires and twist the whole motor . Should be easy for you.

mike, December 2008
Make sure all water is out. Unplug from power. Tip machine back against wall as far as you can. Remove wiring plug & earth wire from pump. On R.H. side nearest to cabinet you will see a white plastic clip. Lift clip slightly & turn pump body anti clockwise until it drops out of retainer.(little bit more water will come out get towel handy) Fit new pump making sure you insert it into retainer squarely & with wiring plug 90 deg towards the cabinet. Once it is pushed up into retainer, turn pump body clockwise until white clip drops in to lock it. You will hear it click. Put back earth wire & wiring plug. Dry any water off pump. Run little bit of water into machine & then pump out. Tip machine again & check for leaks.

Lincoln Appliance NZ, November 2008