i have lost the keys and the ignition turns with any old key but wont start, it will cost over £200 to get a key lockset and reprogram it, the van would then have to be towed 15 mile to do so, it there anyway to get it going without this process as its an old van and not worth spendin that much on it?

marc, November 2008

Hi,i need to replace this Magenti Marelli immobiliser box (Magneti Marelli part number: 1358239080unit as my old one has burnt out , if i send you the new unit with the key can you code them up ???

Dose the unit need to be paired to the engine ecu to do you now and can you do that.
Or can you remove immobilser so the van will just run
Can you help in any way if so how much please

JOHN, January 2015

you need the code and you can then insert the key and use the brake peddle to enter the code an iveco dealer will tell you how this is done and the vehicle will start

mark, January 2014

I have an IVECO Daily 35C12 HPI. it is 2005 model. it suddenly stops and the key cannot start it again. I need to bypass this key. Please can you help?

Bolaji56, September 2010

ive put a new battery on once i took the old battery of the iveco daily it now tries to start but on dach it indicates key code how can i get over this

mark quainton-davis, October 2009

if its 2001 onwards the imobiliser cant be bypassed, the ecu can be re written to bypass the key sync, but other than that its a trip to iveco or a mobile mechanic with the required diagnostic computers. I used williamsdiesels.com to do my 35c12, he programmed the key onsite and swapped all the locks aswel for £150. hope this helps

Jake, December 2008

IVE got iveco daily got mine bypassed by a spark iveco said it could not be done but it was,ps mine is x reg 2000

paul, November 2008