home Fix label Garden Tools label_important Grass Trimmers category Ryobi

ryobi grass scorpion RCT2800 A?

my ryobi scorpion whipper snipper will only run for a few seconds after starting. fuel lines have been replaced

michael, November 2008

home Fix label Garden Tools label_important Grass Trimmers category Ryobidone

i need de number or serial correct for the spark plug my rct 2800 ryobi thanks

nestor, July 2010

the spark plug correct is.....?

Nestor, July 2010

I have a ryobi grass scorpion and It wont start at all after my little one attact the screws?? wat do i do?

Alex (wollongong), January 2009

Hi Michael
I also have a Ryobi Scorpion that does the same thing, replaced the fuel lines, spark plugs, cleaned out the carby, replaced the diaphraphram, tried resetting the the low idle screw, still the same, runs for about 20 seconds and stops.

Rob, December 2008

Have you adjusted either the fast or slow idle screw? It sounds to me that the low idle screw (L) the one facing forward on the carby needs to be adjusted slightly. Try starting it and then adjust screw clockwise half to one full turn. Try this.

Manny, November 2008

link Click here to see other fixes for Ryobi.