Hello

After replacing the circuit board I'm left with 4 connections and i'm not sure where they go. There are two white ones (see first below) and one pink and one brown connection (second pic). The options are two wires to the spring loaded detergent compartment which is on the left and the other two to the rinse aid compartment.

[img]http://i156.photobucket.com/albums/t22/J4mesy/081119_173735.jpg[/img]

[img]http://i156.photobucket.com/albums/t22/J4mesy/081119_173526.jpg[/img]
Don't want to switch it on without it wired correctly incase I damage the board (£180 from Baumatic)!

Help Appreciated.

James, November 2008

Thanks, It was the thermostat right enough.

James, November 2008

this is either the safety stat or the heating element thermostat should be just behind the element

dave, November 2008

All wired up now and the prob still exists, 5 mins into any cycle, the machine beeps with all lights flashing on the display.

Ahh well, £180 down the pan :(

I notice that on removal of the salt cap, the container is pretty much full of water. Is this correct?

Clutching at straws now!

James, November 2008