My canon pixma mp130 says waste ink absorber full
what shall id o

MU, November 2008

1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by presing (Left) or (right) then OK
3)SET ABS-M LEVEL TO 0
4)OK

Cadderz, June 2009

how do you fix it

hans, December 2008

try unplugging all the leads ie power / usb- open front cover then whilst holding the power button down- re-connect the power lead- the actual ink absorber is in fact a bit of sponge in the bottom of the machine- what you are reading is infact a programme put into the printer that works by counting the sheets of paper-

highhopes, November 2008