This can be very easy, first you must obtain part as this will save you leaving your oven in bits for a day or two, turn off power [to check this try the rest of oven] then take out all shelves and any parts that are in the way then take screws out of back plate inside oven [could be two or four] then element should be plainly visible and if you are lucky should have two screws holding it in [if it does not you might have to remove oven from housing and take off back plate as some have nuts on the rear], if so take out screws then carefully remove element taking care not to pull off wires as if they drop inside you will then have to remove oven from housing and remove back plate to re attatch. the rest should be easy. BEFORE YOU START ANY OF THIS CHECK THAT IT IS NOT JUST THE TIMER THAT IS CUTTING OUT OVEN.
powerhousesteve@hotmail.com, November 2005
