Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

how can i fix my slave cylindr on my nissan terrano 2.7td?

my cluch is floppy, and it wot go ito any gear when car is on. (when car is off i can move th clutch sticK)

whats happenend and how cn i mend it and how long is the jo?
ash, November 2008
I suggest you ignore Glen's abusive remarks. Some people have low tolerance levels and cannot make allowance for mixed abilities. I suppose Glen would advocate having my handicapped son put down!

Try bleeding the clutch and whilst doing so replace the old fluid in the system by bleeding it until the new fresh clean fluid comes through. This solved the very same problem with my daughter's Shogun. People forget that clutch fluid is hygroscopic (same as brake fluid) and will absorb water over the years.
If fluid replacement does not solve your problem then you may need to consider replacing your slave cylinder completely, or at least the seals. Best of luck anyway.

Chicks Fan, November 2008
link Click here to see other fixes for Nissan Terrano 2.7TD.