It is a jet stream washer/ dryer and does not dry the clothes when they are on the drying cycle, although it does still get very hot.

I have emptied the little filter at the front of the machine and pulled the whole machine out to see if I can get in the back to remove any filters from there but the whole of the back appears to be one piece of steel and therefore immovable.

Any suggestions?

Greensj, December 2008

the back half of the machine comes off and is split down the middle.2 plastic caps at the bottom sides which need to be removed.lid removed (2 screws at back).2 or 4 screws secure rear half under lid you removed and 2 or 3 screws across rear panel at the bottom.once you have removed the rear panel you will find a condensor tank down the side and these get blocked causing your fault.remove condensor tank and wash it out with a hose.refit all parts and test

ck, December 2008