my machine went bang last night and sparks came out ! still turns on, but when set to a programme and door is shut, the door locked light flashes, even though door is shut correctly.

Alison, December 2008

it does not seem to want to do a long spin,it is pumping out water.i have removed hose outlet and cleaned it,s washing but washing is coming out wet through.

handy jane, April 2009

Check out the carbon brushes in the motor. Theyre graphite blocks which transfer mains power to the copper segments of the motor -Theyre probably worn down. Power off, drag machine out onto the floor, remove the back cover and locate the motor. May help if the machine is tilted at an angle or laid on its side. The brushes are at the other end of the motor from the drive pulley. The holders are plastic or bakelite and are generally held in with screws or plastic clips. Also, look at the copper segments they run on to check for burning or pitting. If the segments are burnt or damaged you need a replacement motor or a replacement armature (motor part) if you can source one. Occasionally may be a fault in the motor drive circuit board - in which case replacement of board only real option.

Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy, December 2008