Andy asked ... How can I mend my MacAlistair 450w hedge trimmer?    |    Felix asked ... Hitachi vt-m70em?    |    Katie Bond asked ... Fixing auto threader on Baby Lock Enlighten Overlocker?    |    Chris. asked ... Miele W800 novotronic washing machine?    |    Larry asked ... How to stop my steam iron from leaking. Model dw2463 Rowenta?    |    Click here to ask your question

cr80 2000 model?

my bike cut out plenty of compression and a good spark just wont start could it be the woodruff key?
dean, December 2008
my friend steve is a butt stabbin half wit as he has not asked the question,as why do you mention the woodruff key

mutley, December 2008
check your 2 strokE.

If there is too much oil in your petrol then the spark plug will oil up. i have 3 little techniques that i use when one of my bikes wont start.(i have a cr80)

1. turn the petrol off, turn the throttle flat out and kick the bike around 5 to six times. This cleans the plug. once you have done this turn the petrol back on and try starting your bike normaly!

2. remove the spark plug and wire brush the top of the head cleaning it up nicely.

3. remove the spark plug and take a lighter to the head of it and heat it up until it has a bit of a glow. put it back in the bike and try kicking it over!

hope this helps m8

:D

Steve, December 2008