Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Ian Scott asked ... Remove cover off gas boiler?    |    wendy asked ... Old Creda Solar Plus Cooker will not come on?    |    Click here to ask your question

Vaillants Combicompact VCWGB242EH?

With the centrel heating clock switched off the flue fan stays running and every so often the burner lights for approc 4 -5 secs. The pump is also running as it is hot and if you take out the bleed screw you can see it turning. No hot water is being requested at the time either. Any ideas?
Paul, December 2008
I cannot comment on the flue fan running because my system does not have one. But my boiler also fires for a few seconds when a tap is opened and closed on the cold supply on the same mains pipe as the boiler. It appears that the pressure fluctuation on the cold main triggers the ignition system for a few seconds and then the boiler shuts down when it finds it is not needed. You could investigate from this angle. If the circulation pump keeps running for any great length of time this is probably not the answer. In my case it is just for 10 seconds or so after each firing and seems to cause no real problem. Hope this helps.

Robert, December 2008