I have a Bosch Classixx Maxx freedom/performance dishwasher that seems to have stopped halfway through a cycle. The Check Water light is on and the dishawasher has not drained. I have tried resetting it but still will not drain and restart. Just gurgles alittle then Check Water Light comes back on.
Any Ideas?

stuart, December 2008

When I had the check water light on the symptoms where the machine would continuously fill and empty. I have got the machine to work again by removing the water flow meter (which is located inside at the bottom of the machine it has an inlet and outlet hose the inlet being connected to the inlet valve of the machine). I checked for continuity with a meter and blew through it until a heard it spin I have now re-fitted it and the machine works fine so I will buy a new meter ASAP in case it packs-in again,

Ade, March 2009

No-one has any idea Stu.I asked the same question a month ago.I just binned mine in the end.It was only about 3 yrs old.I will never get a Bosch again.Get the Beko one for £160.AAA grade wash and a yrs warranty.It may cost you just as much to get the Bosch mended.

Tony S, December 2008