Dwayne B. asked ... Intermittent (twice) Then Complete Loss of Power?    |    Aunt Bee asked ... Bernina Update 1630 work light not working?    |    Larry asked ... Hybrid Weed wacker not working with battery?    |    Dan asked ... Why is Google Keep so slow on my iPhone?    |    dave s asked ... Transmission not working?    |    Click here to ask your question

How do you Reset computer Nissan tino 2000?

Hi experts I.ve a nissan tino 2000 And mechanics have worked on the wheelboard But now the airbag light is Flickering constantly and the seatbelt light do Not respond The mechanics say that all has to do with the Reset of the computer from the car.but they don't know if the car automaticall Reset it self or they have to do it Can you tell me pleasse
Carol, January 2009
I found this on the web and it worked perfectly for me. The problem reoccurred about 4 months later. I just repeated the exercise and it has been OK since. I printed off these instructions and put them in my glovebox!
1. Turn ignition key part way so that lights on dash come on but don't start the engine.
2. Watch the airbag light closely. It will stay on for a few seconds and as soon as it blinks off turn the key to off INSTANTLY.
3. Count to 5.
4. Repeat steps 1-3 above twice so that you have completed this cycle 3 times.
5. Turn the key again and watch the light. It should start blinking more slowly. This is in diagnostic mode. No need to hurry this time, but turn off and count to 5 again.
6. This should do the trick, if not, have another go.
Good luck

Rob, January 2009
link Click here to see other fixes for Nissan.