2 hours ago Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    John asked ... How to fix my fireplace?    |    Click here to ask your question

Partner Chainsaw won't go?

My Partner chainsaw started hunting when running. It then stopped all together. Occasionaly it will start and run for about 2 seconds. I've taken out the jets and blown them through but it made no difference. Any ideas welcome.
Brian, January 2009
....or you could simply change the pump and metering diaphragms at a fraction of the cost. Given that you know how to remove the jets etc, replacing the diaphragms for the cost of around a tenner would be a walk in the park for you.

A lot cheaper than replacing a complete carb.

pleasant, January 2009
First off, is there a spark at the plug. If so try putting a small amount of fuel down the spark plug hole and then try starting with the plug back in, if it starts then you have a fuel problem. New carburetor is probably ur only solution.

Sean, January 2009
Air leak?

pleasant, January 2009