Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

hotpoint first edition 1200 will not empty?

After finishing a prgram my machine wont empty. i have managed to get the clothes out.

you can select other programs

is it the pump or is their a filter

many thanks

Darren Butterworth
Darren, January 2009
hi could be just the filter if you remove the small panel on the back of the mahine at the bottom you will see a black pipe clipped to the bottom of the drum leading to the pump, the filter is inside this pipe if you unclip it you will be able to check it try to bail out as much water as possible so water doesnt go everywhere, if this is clear unscrew the pump and check this isnt blocked but note the pump housing is usually screwed from underneath so you may have to tilt the machine forward a bit to unsrew. Hope this helps

darren, January 2009
link Click here to see other fixes for Hotpoint.