I have removed drum from machine, Need to find out how to remove centre hex key bolt on DriveBelt wheel and in a Clockwise or Anticlockwise Direction as it is Solid and dont want to round off the Hex Key.

Allan, January 2009

put a mat on the floor and lay the drum on its front (gasket to the floor).now with a hammer strike the hex bolt.use a socket as a drift if needed.hopefully this will release the lock compound on the thread.drop a bar or screwdriver into the holes in the rear tub through the pulley as this will stop it rotating whilst trying to release it.anticlockwise to release hex nut

ck, January 2009