I have noticed during the first 10 mins of a washing programme that the drum only does part turns and at times does not turn at all. After ten mins, the cycle continues normally.
Is this normal or does this suggest a fault?

Craig Moody, December 2005

My washer/dryer "seems to be stuck in a drying program" and gives a rapid flashing lamp on the on/off switch. Ive tried to run that program and every other program and it tries to complete the dry program and then switches off, giving the impresion that the power has been lost. checked inside the washer and the power is there, but i can not turn it on by the on off button (button works). It delibretly not allowing me to switch it on ????
dennis.grey2@ntlworld.com

dennis grey, March 2006

LIGHTS KEEP FLASHIN ON BOARD. DRY HIGH HEAT. REDUCE CREASE. TIME SAVER. AND THE ON/OFF LIGHTS. ANY HELP APPRECIATED

GLYNN, February 2006

THE DRUM (INNER) IN SOME OF THESE MACHINES HAS NOT BEEN BOLTED ON TO THE SPIDER THUS CAUSING IT TO NOT SPIN OR SOMETIMES SPIN. TRY SPINNIN THE DRUM BY HAD AND SEE IF IT GIVES.

GLYNN, February 2006