machine does not enter spin mode Hotpoint wma32 New power supply module and motor and pressure switch

Keith Ashover, December 2005

I have WMA32 model w/machine started and stuck at the start button for 0ne hour does not move

E M Sethi, June 2017

I assume it turns during a wash cycle and the water is being drained by the water pump (pump alright and no blockages). If so you could try blowing in the tube (or using a foot pump) from the pressure switch as sometimes soap powder blocks the inlet to this.
All that would be left would be the timer or motor controller but if it washes you would really expect the motor controller to be o.k but not always as I think another part may be switched for spin.

sparky, December 2005