Morne asked ... My defy dtl 125 toploader?    |    Ernie asked ... How to fix gearchange ldv maxus van 2006?    |    Cuckoo asked ... Changing batteries on a fixed bt corded phone?    |    Marc Nollid asked ... Nissan Micra mk 5 2018 rear seat mecanism?    |    Maggie asked ... New Home 535?    |    Click here to ask your question

Hoover elite 920 agitator shaft water leak?

I have a water leak on the agitator shaft which is visible at the point where the shaft comes through from the plastic tub. This is visible by removing the front panel. Any ideas how to remove the seal and housing over the agitator shaft from inside the tub?
Jim, February 2009
It can't be removed from inside the plastic tub. The bowl has to be removed from the machine after removing the inner bowl. Then from underneath remove everything until you can remove the gearbox support plate. The seal is on top of the plate but underneath the plastic bowl. Quite a major job.

Lincoln Appliance NZ, February 2009
link Click here to see other fixes for Hoover 920.