I just brought i mk1 megane, but the interior fan dosen't work, it worked before but now its stoped working. and i cant move the direction of the fan, its stuck on face, like i cant move it to windscreen or feet of anything. any ideals any one? would help out a lot.

Gleb, February 2009

Try checking the connector block on top of the fan. You can gain access to this via the engine bay. Remove the housing under windscreen on the right hand side and you will see the cover for the fan motor, all these are screwed in by TORX screws T15 or T20 i think. You will see a multiway connector block. Slide the red clip to the left to release the block from its housing and check that the connections have not rusted as water can get into this connector block. If it has then sand the terminals with some sand paper then pop a bit of WD40 onto the connector and terminals and push back together. Push the Red securing clamp back and I popped some silicone onto the top of the connector block to stop water getting in in the future and re assemble the covers. This may help. Good Luck

Paul N, July 2009