SLIGHT BUT CONSTANT DRIPPING LEAK FROM THE TOP OF THE TAP.DO I TAKE THE SMALL BLUE/RED PLASTIC INDICATOR OFF TO LIFT THE HANDLE OFF AND INSERT AN APPROPRIATE NEW VALVE?

THANKS FOR ANY ADVICE.

M. T. SHARP

M.SHARP, February 2009

Yeah take the cap off and there should be a little screw holding the head on so unscrew that, then it'll be a case of unscrewing the valve seat and either replacing the washer if that's perished or replace with a complete new valve. If it's the ceramic type buy a whole new ceramic cartridge, and obviously make sure your water to the tap is turned off first by the way.

Andy, February 2009