replace belt on white knight tumble dryer model no cl 372 wv

joe white, February 2009

I found a thin piece of strong cord, with the machine upside down, pulling the belt towards the pulley, helped get the belt over the pulley.

rich foxen, October 2013

easy, thanks

adam, July 2012

remove all the screws from the back panel,then carefully pull the back out until there is a gap for the belt to go between back panel and drum.fit the belt around drum (will be tight),then tip dryer on its side and remove plate on base (4 screws).find belt and pull it as hard as you can over the motor pulley ( very hard ).reassemble and try

ck, February 2009