How do I fix a belt to my white knight 3kg tumble drier

julie barnard, February 2009

Or remove only the outer screws from the back plate, leaving the drum still attached. Pull back panel and drum and fit belt from the front.

Guinness, February 2009

remove all the screws from the back panel,then carefully pull the back out until there is a gap for the belt to go between back panel and drum.fit the belt around drum (will be tight),then tip dryer on its side and remove plate on base (4 screws).find belt and pull it as hard as you can over the motor pulley ( very hard ).reassemble and try.

ck, February 2009